Schematic Reference: Instrument Cluster Schematics

Connector End View Reference: Displays and Gages Connector End Views

Did you perform the Diagnostic System Check - Vehicle?

--

Go to Step 2

Go to Diagnostic System Check - Vehicle

Verify the hourmeter operation. Refer to Instrument Cluster Description and Operation .

Does the hourmeter operate normally?

--

Go to Testing for Intermittent Conditions and Poor Connections

Go to Step 3

Replace the instrument panel cluster (IPC). Refer to Control Module References for replacement, setup, and programming.

Did you complete the replacement?

--

Go to Step 4

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 2