Removal Procedure
- Apply the parking brake.
- Block the vehicle wheels.
- Drain all of the air reservoirs. Refer to
Air Brake Reservoir Draining
.
- Remove the governor air line.
- Remove the governor bolts (3) and the washers.
- Remove the governor (2).
- Remove the governor gasket (1).
Installation Procedure
- Install the governor gasket (1).
- Install the governor (2).
Notice: Refer to Fastener Notice in the Preface section.
- Install the governor washers and the bolts (3).
Tighten
Tighten the bolts to 21 N·m (15 lb ft).
- Install the governor air line.
- Start the engine.
- Check for leaks. Refer to
Air Brake System Testing
.
- Check for proper brake operation.
- Remove the wheel blocks.