GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1986996  Size: MH
  1. Remove the ECU bracket.
  2. Remove the fuel supply hose (13).
  3. Remove the bolt (9) and nut (3).
  4. Remove the pipe retaining clips (10, 11).
  5. Remove the I bolt (2). Discard the washer.
  6. Remove the fuel supply pipe (1).

Installation Procedure


    Object Number: 1986996  Size: MH
  1. Position the fuel supply pipe (1) and hand tighten the I bolt (2). Use a NEW washer on the I bolt.
  2. Install the fuel pipe clips (10, 11) to the fuel supply pipe (1).
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the fuel supply pipe retaining bolt (9) and nut (3).
  5. Tighten

        • Tighten the I bolt to 17  N·m (13 lb ft).
        • Tighten the fuel supply pipe retaining bolt and nut to 9  N·m (80 lb in).
  6. Install the fuel supply hose (13).
  7. Install the ECU bracket.
  8. Start the engine, and confirm fuel is not leaking from the connections.