Removal Procedure
- Remove the fan clutch. Refer to
Fan Clutch Replacement
.
- Disconnect the camshaft position (CMP) sensor electrical connector.
- Remove the fan pulley bolts/nuts.
- Remove the fan pulley.
- Remove the insulator, if required.
Installation Procedure
- Install the insulator, if removed.
Ensure the insulator is correctly placed.
Notice: Refer to Fastener Notice in the Preface section.
- Install the fan pulley.
- Install the fan pulley bolts/nuts.
Tighten
Tighten the bolts/nuts to 41 N·m (30 lb ft).
- Connect the CMP sensor electrical connector.
- Install the fan clutch. Refer to
Fan Clutch Replacement
.