GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1732098  Size: SH
  1. Remove the upper right valve rocker arm cover. Refer to Valve Rocker Arm Cover Replacement - Upper Right Side .
  2. Remove the fuel injectors. Refer to Fuel Injector Replacement .
  3. Remove the rear EGR cooler tube bracket bolts and bracket.

  4. Object Number: 1335929  Size: SH
  5. Remove the lower valve rocker arm cover bolts.
  6. Remove the lower valve rocker arm cover.
  7. Remove the gasket from the lower valve rocker arm cover.
  8. Inspect the lower valve rocker arm cover gasket for damage, replace if necessary. Otherwise reuse the old gasket.

Installation Procedure


    Object Number: 1335929  Size: SH
  1. Install the lower valve rocker arm cover gasket.
  2. Install the lower valve rocker arm cover.
  3. Install the lower valve rocker arm cover bolts.
  4. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1411029  Size: SH
  5. Tighten the lower valve rocker arm cover bolts.
  6. Tighten
    Tighten the bolts in the sequence shown to 10 N·m (89 lb in).


    Object Number: 1732098  Size: SH
  7. Install the rear EGR cooler tube bracket and bolts.
  8. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).

  9. Install the fuel injectors. Refer to Fuel Injector Replacement .
  10. Install the right upper valve rocker arm cover. Refer to Valve Rocker Arm Cover Replacement - Upper Right Side .