Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the exhaust manifold studs to 20 N·m (15 lb ft).
Tighten
• | Tighten the left exhaust manifold center bolt to 35 N·m (26 lb ft). |
• | Tighten the left exhaust manifold nuts to 16 N·m (12 lb ft). |
Tighten
Tighten the left exhaust manifold heat shield bolts and nuts to 25 N·m (18 lb ft).
Tighten
Tighten the left spark plugs to 20 N·m (15 lb ft).
Important: Fully install the spark plug wire by pushing on the exposed end of the spark plug boot. Do not push the spark plug wire onto the spark plug by using the metal heat shield.