Preliminary Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Disconnect the differential pressure sensor harness connector.

1

Hose Clamp (Qty: 2)

2

Differential Pressure Hose (Qty: 2)

Tip
Draw adaptation marks before disconnection.

3

Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
22 N·m (16 lb ft)

4

Screw (Qty: 4)

Tighten
24 N·m (17 lb ft)

5

Bracket