Special Tools
J 39400-A
Halogen Leak Detector
Removal Procedure
- Remove the right wheelhouse panel. Refer to
Wheelhouse Panel Replacement
.
- Remove the air cleaner. Refer to the appropriate procedure:
- Disconnect the low pressure switch electrical connector.
- Remove the low pressure switch from the accumulator.
- Remove the O-ring seal.
Installation Procedure
- Install the new O-ring seal to the switch. Refer to
O-Ring Replacement
.
Notice: Refer to Fastener Notice in the Preface section.
- Install the air conditioning (A/C) low pressure switch to the accumulator.
Tighten
Tighten the switch to 4 N·m (35 lb in).
- Connect the low pressure switch electrical connector.
- Install the air cleaner. Refer to the appropriate procedure:
- Install the right wheelhouse panel. Refer to
Wheelhouse Panel Replacement
.
- Leak test the fittings of the component using the
J 39400-A
.