Important: The following steps must be completed before using the symptom table:
- Perform the
Diagnostic System Check - Vehicle before using the symptom tables in order to verify that all of the following are true:
- Review the system operation in order to familiarize yourself with the system functions. Refer to
Wiper/Washer System Description and Operation.
Visual/Physical Inspection
• | Inspect the washer fluid reservoir for the proper fluid level and condition. |
• | Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom. |
Intermittent
• | If the wipers operate at low speed for approximately 3 seconds and then stop, the wiper motor park switch, or its signal circuit, may be malfunctioning. |
Symptom List
Refer to a symptom diagnostic procedure from the following list in order to diagnosis the symptom: