GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 828456  Size: SH
  1. Remove the bolts that retain the door lock striker to the door opening.
  2. Remove the door lock striker from the door opening.

Installation Procedure


    Object Number: 828456  Size: SH
  1. Install the door lock striker to the door opening.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the bolts in order to retain the door lock striker to the door opening.
  4. Tighten
    Tighten the retaining bolts to 10 N·m (89 lb in).