For 1990-2009 cars only
- Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Clean the area around the fill plug.
- If equipped with a Eaton® Fuller® FS series transmission, remove the oil fill plug (1).
- If equipped with a Eaton® Fuller® RT series transmission, remove the oil fill plug (2).
- If equipped with a Spicer® ES transmission, remove the oil fill plug.
- Using your index finger, inspect the oil level.
- If oil level is low, add until correct.
- If equipped with a Eaton® Fuller® transmission, use Eaton® Roadranger® CD50 transmission fluid.
- If equipped with a Spicer® transmission, use Spicer® MIL-2104 D API-SF, or API-CD transmission fluid.
- Ensure that the oil is level with the fill plug opening.
- Install the oil fill plug.
- If equipped with a Eaton® Fuller® RT series transmission, install the oil fill plug (2).
- If equipped with a Eaton® Fuller® FS series transmission, install the oil fill plug (1).
- Lower the vehicle.
Important: When adding oil, types and brands of oil should not be mixed because of possible incompatibility.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
If equipped with a Spicer® transmission tighten the oil fill plug to 45 N·m (33 lb ft).
Tighten
Tighten the oil fill plug to 82 N·m (60 lb ft).
Tighten
Tighten the oil fill plug to 82 N·m (60 lb ft).
