Power Brake Booster Outlet Hose Replacement L18/LB7/LLY AND LMM
Removal Procedure
Important: Note the position of all the tie-wraps, power steering hoses and the hose insulators for proper re-installation.
- Remove the tie-wraps and the hose insulators.
- Disconnect the hydraulic brake booster outlet hose from the hydraulic brake booster.
- Disconnect the hydraulic brake booster outlet hose from the power steering gear.
Refer to
Power Steering Hose Quick Connect Fitting
.
- Remove the hydraulic brake booster outlet hose from the vehicle. Refer to
Power Steering Hose Quick Connect Fitting
.
Installation Procedure
Notice: Do not start the engine with any power steering hose disconnected,
or damage to the components could occur.
- Install the hydraulic brake booster outlet hose to the vehicle.
- Connect the hydraulic brake booster outlet hose to the power steering gear. Refer to
Power Steering Hose Quick Connect Fitting
.
Notice: Refer to Fastener Notice in the Preface section.
- Connect the hydraulic brake booster outlet hose to the hydraulic brake booster. Refer to
Power Steering Hose Quick Connect Fitting
.
Tighten
Tighten the hydraulic brake booster outlet hose clamp to 5 N·m (45 lb in).
- Install the tie wraps and the hose insulators.
- Bleed the system. Refer to
Power Steering System Bleeding
.
Power Brake Booster Outlet Hose Replacement LG4/LG5/LF6 and LF8
Removal Procedure
Important: Note the position of all the tie-wraps, power steering hoses and the hose insulators for proper re-installation.
- Remove the tie-wraps and the hose insulators.
- Disconnect the hydraulic brake booster outlet hose from the hydraulic brake booster.
- Disconnect the hydraulic brake booster outlet hose from the power steering reservoir.
- Remove the hydraulic brake booster outlet hose from the vehicle.
Installation Procedure
Notice: Do not start the engine with any power steering hose disconnected,
or damage to the components could occur.
- Install the hydraulic brake booster outlet hose to the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Connect the hydraulic brake booster outlet hose to the power steering reservoir.
Tighten
Tighten the clamp to 5 N·m (45 lb in).
- Connect the hydraulic brake booster outlet hose to the hydraulic brake booster.
Tighten
Tighten the hydraulic brake booster outlet hose fittings to 27 N·m (20 lb ft).
- Install the tie wraps and the hose insulators.
- Bleed the system. Refer to
Power Steering System Bleeding
.