Note: Do not remove any constant tension clamp retaining a bellow to an air cleaner elbow. Once a constant tension clamp is removed the integrity of the clamp is damaged. The sealing joint between a bellow and the air cleaner bellow should not be broken. Once this joint is broken, the air cleaner duct assembly must be replaced.

1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement.
2. Loosen the air cleaner outlet duct clamp (2) at the air intake pipe.
3. Remove the air cleaner outlet duct.

1. Install the air cleaner outlet duct to the air intake pipe.
2. Ensure that the alignment tab (1) on the outlet duct, aligns with the tab (2) on the air intake pipe.

Caution: Refer to Fastener Caution in the Preface section.




3. Tighten the air cleaner outlet duct clamp (2) at the air intake pipe.

Tighten
Tighten the clamp to 2.5 N·m (22 lb in).

4. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement.