Remove the following components from the bumper bracket (3):
• | The nut (1) |
• | The washer (2) |
• | The bumper bolt (5) |
• | The bumper (4) |
Caution: Refer to Fastener Caution in the Preface section.
Install the following components to the bumper bracket (3):
• | The bumper (4) |
• | The bumper bolt (5) |
• | The washer (2) |
• | The nut (1) |
Tighten
Tighten the bumper nut to 50 N·m (37 lb ft).