Removal Procedure
- Remove the air brake chamber clevis.
- Remove the air line from the air brake chamber assembly. Refer to
Hose and Line Replacement - Nylon Push-In Type Fitting.
- Remove the mounting nuts and the washers from the air brake chamber assembly.
- Remove the air brake chamber assembly from the brake chamber/camshaft support bracket.
Installation Procedure
- Install the air brake chamber assembly to the brake chamber/camshaft support bracket.
Caution: Refer to Fastener Caution in the Preface section.
- Install the mounting washers and the nuts to the air brake chamber assembly.
Tighten
• | Tighten the (Type 16) service brake chamber assembly mounting nuts to 40 N·m (30 lb ft). |
• | Tighten the (Type 20 and Type 24) service brake chamber assembly mounting nuts to 106 N·m (80 lb ft). |
- Install the clevis.
- Install the air line to the air brake chamber assembly. Refer to
Hose and Line Replacement - Nylon Push-In Type Fitting.