GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 TopKick C-Series (Conventional) C4/C5 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Parking and Turn Signal Lamp Replacement

Removal Procedure
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  2. Disconnect the electrical connector.

    3. Object Number: 815608 Size: SH
  3. Remove the 2 nuts and the backing plate.
  4. Remove the park/turn signal lamp housing.

Installation Procedure

    Object Number: 815608 Size: SH
  1. Install the park/turn signal lamp housing.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the backing plate and the two retaining nuts.

    3. Tighten
    Tighten the retaining nuts to 8 N·m (71 lb in).

  3. Connect the electrical connector.
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.