Removal Procedure
- Support the transfer case with a suitable jack.
- Remove the bolts and nuts from the transfer case crossmember to the side bracket.
- Remove the side bracket bolts and nuts.
- Remove the side bracket from the vehicle.
Installation Procedure
- Install the side bracket to the vehicle.
Caution: Refer to Fastener Caution in the Preface section.
- Install the side bracket bolts and nuts.
Tighten
Tighten the nuts to 50 N·m (37 lb ft).
- Install the bolts and nuts from the transfer case crossmember to the side bracket.
Tighten
Tighten the nuts to 70 N·m (52 lb ft).
- Remove the support from the vehicle.