GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 TopKick C-Series (Conventional) C4/C5 🢒 Steering 🢒 Steering Wheel and Column 🢒 Turn Signal Cancel Cam and Upper Bearing Inner Race Replacement

Special Tools
    • J 23653-SIR Lock Plate Compressor
    • J 42137 Cam Orientation Plate Adapter

Removal Procedure

    Warning: Refer to SIR Warning in the Preface section.


    Object Number: 330127 Size: SH
  1. Disable the SIR system. Refer to SIR Disabling and Enabling.

    2. Note: Let the SIR coil hang freely after removal.

  2. Remove the SIR coil. Refer to Steering Wheel Inflatable Restraint Module Coil Replacement.
  3. Compress the shaft lock shield assembly using J 23653-SIR and J 42137 .
  4. Remove the bearing retainer (1) from the steering shaft assembly.
  5. Discard the bearing retainer.
  6. Remove J 23653-SIR and J 42137 from the steering shaft assembly.

    7. Object Number: 318239 Size: SH
  7. Remove the following parts from the steering shaft assembly:
    8. 7.1. The shaft lock shield assembly (5)
    7.2. The turn signal cancel cam assembly (4)
    7.3. The upper bearing spring (3)
    7.4. The upper bearing inner race seat (2)
    7.5. The inner race (1)

Installation Procedure

    Object Number: 330130 Size: SH
  1. Lubricate the lower brass surface of the turn signal cancel cam assembly (4) with GM P/N 12377900 (Canadian P/N 10953529).
  2. Lubricate the inner race with GM P/N 12345718 (Canadian P/N 10953516)
  3. Install the following parts onto the steering shaft assembly:
    4. 3.1. The inner race (1)
    3.2. The upper bearing inner race seat (2)
    3.3. The upper bearing spring (3)
    3.4. The turn signal cancel cam assembly (4)
    3.5. The shaft lock shield assembly (5)

    Object Number: 330127 Size: SH
  4. Compress the shaft lock shield assembly using J 23653-SIR and J 42137 .
  5. Install the new bearing retainer (1) onto the steering shaft assembly.
  6. Firmly seat the bearing retainer (1) into the groove on the steering shaft assembly.
  7. Remove J 23653-SIR and J 42137 from the steering shaft assembly.

    8. Warning: Refer to SIR Inflator Module Coil Warning in the Preface section.

  8. Install the SIR coil. Refer to Steering Wheel Inflatable Restraint Module Coil Replacement.
  9. Enable the SIR system. Refer to SIR Disabling and Enabling.