Special Tools

J 42640 Steering Column Pin

1. Install the J 42640 in the steering column lower access hole.
2. Remove the intermediate shaft from the steering gear. Refer to Intermediate Steering Shaft Replacement.



3. Remove the bolts retaining the lower steering column seal (1).
4. Remove the lower steering column seal from the vehicle.



5. Remove the upper steering column seal from the steering column.

1. Install the upper steering column seal to the steering column.
2. Install the lower steering column seal to the vehicle.

Caution: Refer to Fastener Caution in the Preface section.




3. Install the bolts retaining the lower steering column seal (1).

Tighten
Tighten the retaining bolts to 2 N·m (18 lb in).

4. Install the intermediate shaft to the steering gear. Refer to Intermediate Steering Shaft Replacement.



5. Remove the J 42640 from the steering column lower access hole.