Front Bumper Replacement Steel Bumper

1. Support the bumper.



2. Remove the lower bolts, the washers, and the nuts that are holding the bumper to the brackets or the extension.



3. Remove the upper bolts, the washers and the nuts.
4. Remove the bumper from the brackets.

1. Support the bumper.



2. Install the upper bolts, the washers, and the nuts through the bumper to the brackets or the extension.

Caution: Refer to Fastener Caution in the Preface section.




3. Install the lower bolts, the washers, and the nuts that attach the bumper to the brackets or the extension.

Tighten

•	Tighten the bumper nuts to 65 N·m (48 lb ft).

•	Tighten the bumper bracket bolts to 70 N·m (52 lb ft).

Front Bumper Replacement Swept Back Bumper

1. Support the bumper.



2. Remove the lower bolts, the washers, and the nuts that are holding the bumper to the brackets or the extension.



3. Remove the upper bolts, the washers and the nuts.
4. Remove the bumper from the brackets.

1. Support the bumper.



2. Install the upper bolts, the washers, and the nuts through the bumper to the brackets or the extension.

Caution: Refer to Fastener Caution in the Preface section.




3. Install the lower bolts, the washers, and the nuts that attach the bumper to the brackets or the extension.

Tighten

•	Tighten the bumper nuts to 90 N·m (66 lb ft).

•	Tighten the bumper extension nuts to 24 N·m (18 lb ft).

•	Tighten the bumper bracket bolts to 183 N·m (134 lb ft).