Removal Procedure
- Support the transfer case with a suitable jack.
- Remove the transfer case crossmember mount nut.
- Remove the transfer case crossmember mount bolt and washer.
- Remove the transfer case crossmember mount .
Installation Procedure
- Install the transfer case crossmember mount .
- Install the transfer case crossmember mount bolt and washer.
Notice: Refer to Fastener Notice in the Preface section.
- Install the transfer case crossmember mount nut.
Tighten
Tighten the nut to 125 N·m (92 lb ft).
- Remove the support from the vehicle.