GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 896573  Size: SH
  1. Remove the driver side knee bolster. Refer to Driver Knee Bolster Panel Replacement.
  2. Open the DRL module housing (2) and remove the circuit board (1).

Installation Procedure


    Object Number: 896573  Size: SH
  1. Install the circuit board (1) to the DRL module housing (2) and close the lid.
  2. Install the driver side knee bolster. Refer to Driver Knee Bolster Panel Replacement.
  3. Refer to Control Module References for programming and setup information.