DEFINITION: Any noise emitted from the front of the vehicle that is induced by vehicle speed or driving terrain as related to the front suspension.

Did you review the General Description and perform the necessary inspections?

Go to Step 2

Go to Symptoms - Suspension General Diagnosis

Important: Compare this vehicle to an identical vehicle in order to determine if the customer's concern is a normal operating characteristic of the vehicle.

Attempt to duplicate the noise. Road test the vehicle.

Is the front suspension noisy?

Go to Step 3

System OK

1. Set the marking break.
2. Turn the ignition OFF.
3. Bounce the front of the vehicle in order to duplicate the noise.

Is the noise present?

Go to Step 4

Go to Step 5

1. Bounce the front of the vehicle. Use a stethoscope in order to locate the source of the noise.
2. Repair or replace the suspect component(s) as necessary.

Did you complete the repair?

Go to Step 24

--

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Inspect all of the front suspension components for any damage.

Are any components damaged?

Go to Step 6

Go to Step 7

Repair any damaged components.

Did you complete the repair?

Go to Step 24

--

1. Inspect the tires for proper inflation. Refer to Vehicle Certification, Tire Placard, Anti-Theft, and Service Parts ID Label . Correct the tire inflation pressure as necessary.
2. Inspect the tires for unusual wear. Refer to Tire Diagnosis - Irregular or Premature Wear .

Does either tire exhibit unusual tread wear?

Go to Step 8

Go to Step 10

1. Rotate the tires. Refer to Tire Rotation .
2. Road test the vehicle.

Is the noise now emitted from the rear of the vehicle?

Go to Step 9

Go to Step 10

Replace the tires that are causing the noise.

Did you complete the repair?

Go to Step 24

--

Ensure that the steering linkage is lubricated, if applicable. Lubricate/replace as necessary.

Did you service any components?

Go to Step 24

Go to Step 11

Ensure that all of the wheel nuts are tightened to the correct specification. Tighten as necessary. Refer to Fastener Tightening Specifications.

Did you tighten any wheel nuts?

Go to Step 24

Go to Step 12

Use your hands in order to push and pull the shock.

Is the shock loose?

Go to Step 13

Go to Step 15

1. Inspect the shock fasteners for the correct fastener tightening specification. Tighten as necessary. Refer to Fastener Tightening Specifications .
2. Push and pull the shock.

Is the shock loose?

Go to Step 14

Go to Step 24

Replace the loose or worn shock components. Refer to Shock Absorber Replacement.

Did you complete the repair?

Go to Step 24

--

Use your hands in order to push and pull on the stabilizer shaft.

Is the stabilizer shaft loose?

Go to Step 16

Go to Step 19

1. Inspect all of the stabilizer shaft fasteners. Tighten as necessary. Refer to Fastener Tightening Specifications .
2. Use your hands in order to push and pull on the stabilizer shaft.

Is the stabilizer shaft loose?

Go to Step 17

Go to Step 24

Observe the location of the stabilizer shaft looseness.

Is the looseness observed at the stabilizer shaft links?

Go to Step 18

Go to Step 19

Replace the stabilizer shaft links. Refer to Stabilizer Shaft Link Replacement.

Did you complete the repair?

Go to Step 24

--

Inspect the steering knuckle and king pins for looseness or movement.

Is any looseness or movement observed?

Go to Step 20

Go to Step 22

1. Inspect the steering knuckle and king pin fasteners for the correct fastener tightening specification. Refer to Fastener Tightening Specifications . Tighten as necessary.
2. Inspect the steering knuckle and king pins for looseness.

Is the steering knuckle and pin loose?

Go to Step 21

Go to Step 24

Replace any worn or loose king pin bushings. Refer to King Pin Bushing and Bearing Cup Replacement.

Did you complete the repair?

Go to Step 24

--

Inspect the front wheel bearings for wear or noise. Refer to Wheel Bearings Diagnosis .

Does either wheel bearing exhibit wear or noise?

Go to Step 23

Go to Step 8

Replace the wheel bearing(s). Refer to Front Wheel Hub, Bearing, and Seal Replacement.

Did you complete the repair?

Go to Step 24

--

Operate the vehicle in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3