Tools Required
• | J 24430
Differential Side Bearing Installer |
• | J 36597
Side Bearing Puller Pilot - 9.25 inch |
• | J 45711
Differential Side Bearing Remover - Dana 248 |
• | J 45900
Differential Side Bearing Installer - Dana Axles |
• | J 8092
Universal Driver Handle - 3/4 in - 10 |
Removal Procedure
- Raise the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Remove the differential assembly. Refer to
Differential Replacement
.
- Remove the differential side bearing by performing the following steps:
3.2. | Remove the differential side bearing using the
J 45711
and a hydraulic press. |
Important: Mark the inboard shims left or right.
- Remove the inboard shims.
Installation Procedure
- Determine the shim thickness and preload for the differential assembly. Refer to
Differential Carrier Bearing Preload Adjustment
.
- Install the differential side bearing by doing the following:
2.1. | In order to protect the differential case, install the
J 8107-3
in the case on the side opposite of the bearing installation. |
2.2. | Install the inboard shims. |
2.3. | Install the differential side bearing. |
2.5. | Drive the differential side bearing into position using the
J 24430
or the
J 45900
and the
J 8092
. |
- Fill the axle with lubricant. Use the proper fluid. Refer to
Front Axle Lubricant Replacement
.
- Lower the vehicle.