- Raise the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Ensure the vehicle is level.
- Inspect the front axle for leaks. Repair as necessary.
- Clean the area around the front axle fill plug.
- Remove the front axle fill plug.
- Inspect the lubricant level.
Specification
The lubricant level should be between 0-6 mm (0-0.25 in) below the fill plug opening.
- If the level is low, add lubricant until the level is even with the bottom edge of the fill plug opening. Use the proper fluid. Refer to
Fluid and Lubricant Recommendations
.
Notice: Refer to Fastener Notice in the Preface section.
- Install the front axle fill plug.
Tighten
Tighten the front axle fill plug to 33 N·m (24 lb ft).
- Lower the vehicle.