GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the front seats. Refer to Bucket Seat Replacement .
  2. Remove the rear bench , if equipped. Refer to Rear Bench Seat Replacement .
  3. Remove the center console, if equipped.
  4. Remove the engine cover. Refer to Engine Cover Replacement .
  5. Remove the hinge pillar trim panel.

  6. Object Number: 808055  Size: SH
  7. Remove the front door sill plates. Refer to Door Sill Plate Replacement .
  8. Remove the rear door sill plates if equipped.
  9. Remove the front floor mat/carpet from the vehicle.

Installation Procedure


    Object Number: 808055  Size: SH

    Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as the original installation. Always return the carpet to the original location.

  1. Install the front floor mat/carpet to the vehicle.
  2. Install the front door sill plates.

  3. Object Number: 318798  Size: SH
  4. Install the hinge pillar trim panel.
  5. Install the engine cover. Refer to Engine Cover Replacement .
  6. Install the front seats. Refer to Bucket Seat Replacement .
  7. Install the center console, if equipped.
  8. Install the rear bench seat , if equipped.