GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Open the hood.

  2. Object Number: 885336  Size: SH
  3. Remove the screws retaining the air inlet grille panels to the cowl vent.
  4. Remove the wiper arms from the vehicle. Refer to Windshield Wiper Arm Replacement .
  5. Disconnect the washer hoses from the air inlet grille panel.
  6. Remove the air inlet grille panels from the vehicle.

Installation Procedure


    Object Number: 885336  Size: SH
  1. Install the air inlet grille panels to the vehicle.
  2. Align the retainers in the body with the tabs on the grille panel . Press the retainers into place.
  3. Connect the washer hoses to the air inlet grille panel.
  4. Install the wiper arms to the vehicle. Refer to Windshield Wiper Arm Replacement .
  5. Notice: Refer to Fastener Notice in the Preface section.

  6. Install the screws in sequential order to retain the air inlet grille panels to the cowl vent (1-7).
  7. Tighten
    Tighten the screws to 1.7 N·m (15 lb in).

  8. Close the hood.