Removal Procedure
- Apply the parking brake.
- Block the wheels.
- Drain all of the air reservoirs. Refer to
Air Brake Reservoir Draining
.
- Disconnect the wiring harness connector.
- Remove the trailer air brake stop lamp switch.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the trailer air brake stop lamp switch.
Tighten
Tighten the trailer air brake stop lamp switch to 7 N·m (62 lb in).
- Connect the wiring harness connector.
- Start the engine and build up the system air pressure.
- Test the brakes for proper operation.
- Remove the wheel blocks.