Removal Procedure
- If not equipped with the ML6 transmission, remove the transmission. Refer to
Transmission Replacement
for the Medium Duty transmission.
- If equipped with a ML6 transmission, perform the following.
2.3. | Remove the clutch housing bolts and the clutch housing from the flywheel housing adapter. |
- Remove the release bearing.
Installation Procedure
- Apply lubricant GM P/N 12378484 or equivalent to the release bearing .
- Install the release bearing.
- If not equipped with a ML6, install the transmission. Refer to
Transmission Replacement
for the Medium Duty transmission.
Notice: Refer to Fastener Notice in the Preface section.
- If equipped with a ML6 transmission, perform the following:
4.1. | Install the clutch housing to the flywheel housing adapter with the clutch housing bolts. |
Tighten
Tighten the clutch housing bolts to 50 N·m (37 lb ft).