Removal Procedure
- Position the front wheels and the steering wheel straight ahead.
- Mark the position of the steering gear input shaft and the cardan joint of the lower steering shaft.
- Remove the intermediate shaft from the steering gear. Refer to
Intermediate Steering Shaft Replacement
.
- Remove the following components:
Installation Procedure
- Install the input shaft seal (1).
- Install the input shaft protecting cap (2) while making sure the marks on the protective cap (2) and steering box coincide.
- Align the marks on the cardan joint and the steering gear input shaft. Position the cardan joint on the steering gear input shaft.
- Install the intermediate shaft. Refer to
Intermediate Steering Shaft Replacement
.