• | J 3453 Holding Bar |
• | J 7804-A Puller |
Notice: Refer to Fastener Notice in the Preface section.
Tighten
• | Tighten the series 1480 nut to 779 N·m (575 lb ft). |
• | Tighten the series 1550 bolt to 216 N·m (160 lb ft). |
• | Tighten the series 1610, 1710, 1710HD or 1760 nut to 983 N·m (725 lb ft). |
Tighten
Tighten the propeller shaft hanger nuts to 95 N·m (70 lb ft).
3.1. | Stand the propeller shaft (2) on end in the press (1) with the center bearing (3) supported by the press bars (4). |
3.2. | Press the propeller shaft (2) down and off the center bearing (3). |