Table 1: | Engine Specifications |
The following approximate capacities are given in English and metric conversions. See Part C: Recommended Fluids and Lubricants for more information.
Application | Capacities | |
---|---|---|
English | Metric | |
Air Conditioning Refrigerant R134a | 2.13 lbs | .97 kg |
Cooling System - C4/C5 Models | ||
| 27.3 qt | 25.8 L |
| 27.6 qt | 26.1 L |
| 29.8 qt | 28.2 L |
| 30.1 qt | 28.5 L |
Cooling System - C6/C7/C8 Automatic Transmission | ||
| 31.4 qt | 29.7 L |
| 31.2 qt | 29.5 L |
| 33.7 qt | 31.9 L |
| 33.3 qt | 31.5 L |
| 32.5 qt | 30.8 L |
Cooling System - C6/C7/C8 Manual Transmission | ||
| 29.3 qt | 27.7 L |
| 33.0 qt | 31.2 L |
| 32.8 qt | 31.0 L |
| 33.3 qt | 31.5 L |
| 31.6 qt | 29.9 L |
| 35.3 qt | 33.4 L |
| 34.9 qt | 33.0 L |
| 35.4 qt | 33.5 L |
| 33.3 qt | 31.5 L |
| 34.9 qt | 33.0 L |
Engine Oil with Filter | ||
| 14.6 qt | 13.8 L |
| 30.0 qt | 28.4 L |
| 23.8 qt | 22.5 L |
| 10.0 qt | 9.4 L |
Check fill level on the oil indicator after initial fill to make sure it is actually full. Oil level may vary depending on vehicle option content. ¹Additional oil is required with auxiliary oil filter systems. Make sure to add enough extra oil to fill the auxiliary oil filter system. For vehicles equipped with the LUBERFINER 750-C, add 14 quarts (13.25 L). | ||
Fuel Capacity - C4/C5 Models | ||
| 25 gal | 94.6 L |
| 32 gal | 121.1 L |
| 35 gal | 132.5 L |
| 40 gal | 151.4 L |
| 40 gal | 151.4 L |
| 60 gal | 227.1 L |
| 80 gal | 302.8 L |
¹One 25-gallon (94.6 L) tank and one 15-gallon (56.8 L) tank | ||
Fuel Capacity - C6/C7/C8 Models | ||
| 35 gal | 132.4 L |
| 50 gal | 189.2 L |
| 50 gal | 189.2 L |
| 70 gal | 264.8 L |
| 75 gal | 283.8 L |
| 100 gal | 378.5 L |
¹Two 35-gallon (132.4 L) tanks ²One 25-gallon (94.6 L) tank and one 50-gallon (189.2 L) tank ³Two 50-gallon (189.2 L) tanks | ||
Front 4WD Axle (G38) and (FRX) | 7.0 pt | 3.6 L |
Rear Axle - Single Speed | ||
| 8.0 pt | 3.7 L |
| 31.0 pt | 14.7 L |
| 42.5 pt | 20.1 L |
| 51.0 pt | 24.1 L |
| 51.0 pt | 24.1 L |
| 15.0 pt | 7.1 L |
Rear Axle - Tandem | ||
| 34.0 pt | 16.1 L |
| 31.0 pt | 14.7 L |
| 32.0 pt | 15.1 L |
| 29.0 pt | 13.7 L |
Rear Axle - Two-Speed | ||
| 38.0 pt | 18.0 L |
| 38.0 pt | 18.0 L |
| 44.0 pt | 20.8 L |
| 44.0 pt | 20.8 L |
Transfer Case (Four-Wheel Drive) | 4.0 pt | 1.9 L |
Transmission Fluid, Automatic | ||
| 52.0 pt | 24.6 L |
| 35.0 pt | 13.5 L |
Add 2 pints (1 L) when changing spin-on or remote filter. See the Allison® Automatic Transmission Operator's Manual for fluid check and maintenance information. | ||
Transmission Fluid, Manual | ||
| 11.6 pt | 5.5 L |
| 18.4 pt | 8.7 L |
| 18.5 pt | 8.8 L |
| 12.5 pt | 5.9 L |
| 25.1 pt | 11.8 L |
| 29.1 pt | 13.8 L |
| 12.7 pt | 6.0 L |
All capacities are approximate. When adding, be sure to fill to the approximate level, as recommended in this manual. Recheck the fluid level after filling. |
Engine | RPO | Type |
---|---|---|
6.6L V8 DURAMAX® | LLY | Common Rail Fuel System |
7.2L L6 Caterpillar® C7 | LG5 | Hydraulic/Electronic Unit Injector Fuel System |
7.8L L6 DURAMAX® | LG4 | Common Rail Fuel System |
8.1L V8 VORTECâ„¢ | L18 | Single Port Fuel Injector Fuel System |