Removal Procedure
- Relieve the fuel system pressure. Refer to
Fuel Pressure Relief.
- Clean any dirt from the fuel pressure dampener retainer and the surrounding area.
- Remove the fuel pressure dampener clip (1) and dampener.
- Remove the fuel pressure dampener backup ring.
- Remove the fuel pressure dampener O-ring.
Installation Procedure
- Lubricate the fuel pressure dampener O-ring with clean engine oil.
- Install the fuel pressure dampener O-ring.
- Install the fuel pressure dampener backup ring.
- Install the fuel pressure dampener and clip (1).
- Install the fuel fill cap.
- Connect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection.
- Use the following procedure to inspect for leaks:
7.1. | Turn the ignition ON, with the engine OFF, for 2 seconds. |
7.2. | Turn the ignition OFF for 10 seconds. |
7.3. | Turn the ignition ON, with the engine OFF. |
7.4. | Inspect for fuel leaks. |