GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
GMC_Truck
🢒
2007
🢒
TopKick C-Series (Conventional) C6/C7/C8
🢒
Engine
🢒
Engine Controls and Fuel - 6.6L (LMM)
🢒 Fuel Filter Replacement
Removal Procedure
Disconnect the water-in-fuel sensor electrical connector (1) from the engine wiring harness electrical connector.
Remove the fuel filter assembly (1).
Remove the water-in-fuel sensor from the fuel filter. Discard the fuel filter.
Installation Procedure
Important:
The water-in-fuel sensor must only be hand tightened.
Install the water-in-fuel sensor to a NEW fuel filter and tighten 1/2 turn after the seal contacts the filter.
Install the NEW fuel filter to the fuel filter adapter and tighten 1/4 turn after the seal contacts the filter adapter.
Connect the water-in-fuel sensor electrical connector (1) to the engine wiring harness electrical connector.
Prime the fuel system. Refer to
Fuel System Priming