For 1990-2009 cars only
Removal Procedure
- Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
- Disconnect the fuel feed and return pipes (1, 2) from the engine pipes. Refer to Metal Collar Quick Connect Fitting Service .
- Disconnect the appropriate brake lines.
- Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the fuel feed and return pipe bracket nut (2) from the transmission mount.
- Remove the fuel feed and return pipe bracket (1) from the transmission mount stud.
- Remove the fuel feed and return pipe clip bolt (3) from the transmission bracket.
- Disconnect the fuel feed and return front pipes from the chassis pipes. Refer to Metal Collar Quick Connect Fitting Service .
- Remove the front fuel and return pipe assembly from the vehicle.
Installation Procedure
- Position and install the front fuel and return pipe assembly to the vehicle.
- Connect the fuel feed and return front pipes to the chassis pipes. Refer to Metal Collar Quick Connect Fitting Service .
- Install the fuel feed and return pipe clip bolt (3) to the transmission bracket.
- Install the fuel feed and return pipe bracket (1) to the transmission mount stud.
- Install the fuel feed and return pipe bracket nut (2) to the transmission mount.
- Lower the vehicle.
- Connect the fuel feed and return pipes (1, 2) to the engine pipes. Refer to Metal Collar Quick Connect Fitting Service .
- Connect the appropriate brake lines.
- Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
- Bleed the brake system. Refer to Hydraulic Brake System Bleeding .
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the bolt to 25 N·m (18 lb ft).
Tighten
Tighten the nut to 25 N·m (18 lb ft).
