Accessory Switch Replacement Auxiliary

1. Remove the IP Cluster Trim Plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .
2. Remove the auxiliary switch panel bezel.
3. Remove the connector from the switch.
4. Release the tabs that retain the switch.
5. Remove the switch from the bezel.

1. Install the switch into the bezel.
2. Connect the tabs that retain the switch.
3. Install the connector to the switch.
4. Install the auxiliary switch panel bezel.
5. Install the IP Cluster Trim Plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .

Accessory Switch Replacement Center Stack

1. Remove the I/P cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .
2. Remove the accessory switch panel bezel.



3. Remove the connector from the switch.



4. Release the tabs that retain the switch.
5. Remove the switch from the bezel.

1. Install the switch into the bezel.
2. Connect the tabs that retain the switch.



3. Install the connector to the switch.



4. Install the accessory switch panel bezel.
5. Install the I/P cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .

Accessory Switch Replacement Shift Selector

1. Remove the instrument panel (I/P) cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .
2. Remove the shift selector switch panel bezel.
3. Remove the connector from the switch.
4. Release the tabs that retain the switch.
5. Remove the switch from the bezel.

1. Install the switch into the bezel.
2. Connect the tabs that retain the switch.
3. Install the connector to the switch.
4. Install the shift selector switch panel bezel.
5. Install the I/P cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .