Removal Procedure
- Remove the upper left valve rocker arm cover. Refer to
Valve Rocker Arm Cover Replacement - Upper Left Side.
- Remove the glow plug nuts.
- Remove the engine wire harness at glow plugs.
- Remove the fuel injectors. Refer to
Fuel Injector Replacement.
- Remove the fuel injectors return hose clamp at the left rear of engine (1).
- Remove the fuel feed and return line clamp bolt.
- Remove the lower valve rocker arm cover bolts.
- Remove the lower valve rocker arm cover.
- Remove the gasket from the lower valve rocker arm cover.
- Inspect the lower valve rocker arm cover gasket for damage, replace if necessary. Otherwise reuse the old gasket.
Installation Procedure
- Install the lower valve rocker arm cover gasket.
- Install the lower valve rocker arm cover.
- Install the lower valve rocker arm cover bolts.
Caution: Refer to Fastener Caution in the Preface section.
- Tighten the lower valve rocker arm cover bolts.
Tighten
Tighten the bolts in the sequence shown to 10 N·m (89 lb in).
- Install the fuel injectors return hose clamp at the left rear of engine (1).
- Install the fuel feed and return line clamp bolt.
Tighten
Tighten the bolt to 25 N·m (18 lb ft).
- Install the fuel injectors. Refer to
Fuel Injector Replacement.
- Install the engine wire harness to glow plugs.
- Install wires and nuts to glow plugs.
Tighten
Tighten the nuts to 2 N·m (18 lb in).
- Install the upper left valve rocker arm cover. Refer to
Valve Rocker Arm Cover Replacement - Upper Left Side.