- Clean the exhaust manifold.
- Clean the exhaust manifold mating surfaces.
- Inspect the exhaust manifold for cracks.
- Inspect the exhaust manifold mating surfaces for damage.
- Replace the exhaust manifold if any damage is found.
- Measure the exhaust manifold flange for warpage with feeler gauge and a straightedge. Replace the exhaust manifold
if the warpage is more than 0.3 mm (0.0118 in).
- Install the exhaust manifold heat shield.
Caution: Refer to Fastener Caution in the Preface section.
- Install the exhaust manifold heat shield bolts and tighten to
8 N·m (71 lb in).