Coolant Heater Cord Replacement Original

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Disconnect the coolant heater electrical connector (2).
3. Remove the coolant heater cord retainer and bolts.
4. Remove the coolant heater cord.

1. Install the coolant heater cord.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the coolant heater cord bolts and retainer.

Tighten
Tighten the coolant heater cord bolts to 8 N·m (71 lb in).




3. Connect the coolant heater electrical connector (2).
4. Lower the vehicle.

Coolant Heater Cord Replacement 6.6L

1. Disconnect the coolant heater electrical connector.



2. Remove the coolant heater cord retainer and bolts.



3. Remove the coolant heater cord from the floor and dash panel.

Caution: The heater cord must not touch the engine, hot pipes, manifold, or any moving parts. Route the cord to the left front of the engine compartment securing with tie straps as necessary to prevent damage.

1. Install the coolant heater cord to the floor and dash panel.



2. Position the coolant heater cord to the front of the engine.

Caution: Refer to Fastener Caution in the Preface section.

3. Install the coolant heater cord bolts and retainer.

Tighten
Tighten the bolts to 8 N·m (71 lb in).




4. Connect the coolant heater electrical connector.