Removal Procedure
- Remove the locknut (4) and the washers (2) that connect the shock absorber (3) to the shock absorber outboard frame hanger bracket (1).
- Remove the following components that connect the shock absorber (3) to the lower shock absorber bracket (6):
- Remove the shock absorber (3).
Installation Procedure
- Install the shock absorber (3).
Caution: Refer to Fastener Caution in the Preface section.
- Install the washers (2) and the locknut (4) that connect the shock absorber (3) to the upper shock absorber mounting bracket.
Tighten
Tighten the locknut to 85 N·m (63 lb ft).
- Install the following components that connect the shock absorber (3) to the lower shock absorber bracket (6):
Tighten
Tighten the locknut to 85 N·m (63 lb ft).