Stabilizer Shaft Replacement Axle Mounted

Remove the following components from the springs:

1. Remove stabilizer shaft links. Refer to Stabilizer Shaft Link Replacement.
2. Remove the front stabilizer shaft to front axle U-bolts and nuts.
3. Remove stabilizer shaft from the axle.

1. Install the stabilizer shaft.
2. Install the shaft mounting U-bolts and nuts.

Caution: Refer to Fastener Caution in the Preface section.

3. Tighten the stabilizer nuts alternately and evenly until the shaft mounting brackets reach torque.

Tighten
Tighten the stabilizer nuts to 170 N·m (125 lb ft).

4. Install the stabilizer shaft links. Refer to Stabilizer Shaft Link Replacement.

Stabilizer Shaft Replacement Spring Mounted

1. Remove the stabilizer shaft bracket retaining nuts (5) and washers (6).
2. Remove the stabilizer shaft mounting brackets (4).
3. Remove the stabilizer shaft (7).
4. Remove the stabilizer shaft shims (2, 3).

Note: Install the shim (3) with the dimple protruding towards the stabilizer bar.

1. Install the shims (2, 3) to the springs.
2. Install the stabilizer shaft bar (7) to the springs.
3. Install the stabilizer shaft brackets (4) to the springs.

Caution: Refer to Fastener Caution in the Preface section.

Note: Tighten the stabilizer nuts (5) alternately and evenly until the shaft mounting brackets (4) contact the lower shim (3).

4. Install the stabilizer shaft bracket washer (6) and nuts (5).

Tighten
Tighten the stabilizer nuts to 230 N·m (169 lb ft).