Remove the following components from the bumper bracket (3):
ā¢ | The nut (1) |
ā¢ | The washer (2) |
ā¢ | The bumper bolt (5) |
ā¢ | The bumper (4) |
Caution: Refer to Fastener Caution in the Preface section.
Install the following components to the bumper bracket (3):
ā¢ | The bumper (4) |
ā¢ | The bumper bolt (5) |
ā¢ | The washer (2) |
ā¢ | The nut (1) |
Tighten
Tighten the bumper nut to 50 NĀ·m (37 lb ft).