Removal Procedure
- Apply the parking brake.
- Block the wheels.
- Drain all the reservoirs. Refer to
Air Brake Reservoir Draining.
- Remove the trailer air brake service coupling at the trailer air brake coupling stud.
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Install the trailer air brake coupling at the trailer air brake coupling stud.
Tighten
• | Tighten the trailer air brake coupling to 35 N·m (26 lb ft). |
• | Tighten the trailer air brake coupling stud nut to 45 N·m (33 lb ft). |
- Start the engine.
- Charge the air system to the governor cut-out point.
- Use a soap solution in order to inspect for leaks.
- Leakage is not permissible.
- Remove the wheel blocks.