Rear Brake Hose Replacement Non-GZT/GPG

Warning: Refer to Brake Fluid Irritant Warning in the Preface section.

Caution: Refer to Brake Fluid Effects on Paint and Electrical Components Caution in the Preface section.

1. Remove the brake hose from the chassis brake pipe.
2. Remove the retainers and straps, as needed.
3. Remove the brake pipe.
4. Plug or cap the brake pipe.
5. Remove the bracket mounting bolts.
6. Remove the brake hose from the caliper.
7. Remove the brake hose mounting bracket.

Caution: Refer to Fastener Caution in the Preface section.




1. Install the brake hose mounting bracket to frame.

Tighten
Tighten the mounting bolts to 25 N·m (19 lb ft).

2. Install the brake pipes to caliper.

Tighten
Tighten the brake pipe fittings to 25 N·m (19 lb ft).

3. Install the retainer and tie straps, as needed.
4. Bleed the brakes. Refer to Hydraulic Brake System Bleeding.

Rear Brake Hose Replacement GZT/GPG

Warning: Refer to Brake Fluid Irritant Warning in the Preface section.

Caution: Refer to Brake Fluid Effects on Paint and Electrical Components Caution in the Preface section.

1. Remove the brake hose from the chassis brake pipe.
2. Remove the retainers and straps, as needed.
3. Remove the brake pipe from the caliper.
4. Plug or cap the brake pipe and caliper
5. Remove the bracket mounting bolts.
6. Remove the brake hose from the caliper.

Caution: Refer to Fastener Caution in the Preface section.




1. Install the brake hose mounting bracket to frame.

Tighten
Tighten the mounting bolts to 25 N·m (19 lb ft).

2. Install the brake pipes to caliper.

Tighten
Tighten the brake pipe fittings to 25 N·m (19 lb ft).

3. Install the retainers and tie straps, as needed.
4. Bleed the brakes. Refer to Hydraulic Brake System Bleeding.

Rear Brake Hose Replacement Axle

Warning: Refer to Brake Fluid Irritant Warning in the Preface section.

Caution: Refer to Brake Fluid Effects on Paint and Electrical Components Caution in the Preface section.

1. Remove the brake hose from the chassis brake pipe.



2. Remove the retainer.
3. Remove the brake pipe.
4. Plug or cap the brake pipe.
5. Remove the bracket mounting bolts.
6. Remove the brake hose from the caliper.
7. Remove the brake hose mounting bracket.

Caution: Refer to Fastener Caution in the Preface section.




1. Install the brake hose mounting bracket.

Tighten
Tighten the mounting bolts to 32 N·m (24 lb ft).

2. Install the brake pipes.

Tighten
Tighten the brake pipe fittings to 19 N·m (14 lb ft).

3. Install the brake hose through the frame bracket.
4. Connect the fitting to the brake hose.

Tighten
Tighten the fitting to 19 N·m (14 lb ft).




5. Install the retainer.
6. Bleed the brakes. Refer to Hydraulic Brake System Bleeding.