Removal Procedure
- Support the transfer case with a suitable jack.
- Remove the front transfer case crossmember mount nut.
- Remove the front transfer case crossmember bolt and washer.
- Remove the transfer case front bracket mounting bolts.
- Remove the transfer case front bracket from the vehicle.
Installation Procedure
- Install the transfer case front bracket to the vehicle.
Caution: Refer to Fastener Caution in the Preface section.
- Install the transfer case front bracket mounting bolts.
Tighten
Tighten the bolts to 50 N·m (37 lb ft).
- Install the front transfer case crossmember bolt and washer.
- Install the front transfer case crossmember mount nut.
Tighten
Tighten the bolts to 125 N·m (92 lb ft).
- Remove the support from the vehicle.