Removal Procedure
- Gently pry on the dome lamp lens (4) in order to disengage the retaining tabs from the dome lamp housing (2).
- Remove the screws (3) that retain the dome lamp assembly to the vehicle.
- Disconnect the electrical connector from the dome lamp.
- Remove the dome lamp assembly (6) from the vehicle.
Installation Procedure
- Connect the electrical connector to the dome lamp.
- Install the dome lamp assembly (6) to the vehicle.
Caution: Refer to Fastener Caution in the Preface section.
- Install the screws in order to retain the dome lamp to the vehicle.
Tighten
Tighten the screws to 1.5 N·m (13 lb in).
- Install the dome lamp lens (4) to the housing (2).
Apply pressure in order to engage the retaining tabs on the dome lamp lens.