Front Disc Brake Pads Replacement Dayton-Walther

Caution: Refer to Brake Caliper Caution in the Preface section.

1. Remove the brake caliper. Refer to Front Brake Caliper Replacement.

Do not remove the brake line from the caliper.




2. Remove the brake pad retainer spring.



3. Slide the outer brake pad along the rail in the brake caliper housing to the notches.
4. Remove the outer brake pad.
5. Slide the inner brake pad along the rail in the brake caliper housing to the notches.
6. Remove the inner brake pad.

1. Inspect the brake caliper. Refer to Brake Caliper Inspection.



2. Install the inner brake pad.
3. Install the outer brake pad.



4. Install a new brake pad retainer spring.
5. If the service kit includes extra springs, discard the springs.
6. Install the brake caliper. Refer to Front Brake Caliper Replacement.

Front Disc Brake Pads Replacement TRW - Pin Slider

Warning: Refer to Brake Dust Warning in the Preface section.

Caution: Refer to Brake Caliper Supporting to Prevent Hose Damage Caution in the Preface section.




1. Remove the brake caliper. Refer to Front Brake Caliper Replacement.

Do not remove the brake line from the caliper.

2. Remove the inner brake pad from the brake caliper mounting plate.



3. Remove the outer brake pad.

1. Inspect the brake caliper. Refer to Brake Caliper Inspection.



2. Install the outer brake pad into the brake caliper housing.
3. Install the inner brake pad onto the brake caliper mounting plate.



4. Install the brake caliper. Refer to Front Brake Caliper Replacement.
5. Pump the brake pedal several times until the pedal is firm and the disc brake pads are seated.
6. Inspect the brake fluid level in the master cylinder. Refer to Master Cylinder Reservoir Filling.