Was the park brake diagnostic system check performed?

--

Go to Step 2

Go to Park Brake System Check

If the voltmeter is also inoperative, repair circuit 39 or replace GAUGES Fuse 4 as required.

Was a repair completed?

--

Go to Park Brake System Check

Go to Step 3

1. With the Ignition in the RUN position and Park Brake engaged.
2. Disconnect the connector at the Park Brake Switch

Check for voltage at cavity A of the connector. Refer to Measuring Voltage in Wiring Systems

Is voltage present?

12 volts

Go to Step 4

Go to Step 5

Replace the Park Brake Switch. Refer to Parking Brake Indicator Switch Replacement .

Is the repair complete?

--

Go to Park Brake System Check

--

1. Disconnect the Daytime Running Light  (DRL) connector
2. Check for voltage on pin "E" of the connector. Refer to Measuring Voltage in Wiring Systems

Is voltage present?

12 volts

Go to Step 6

Go to Step 7

1. Connect the connector to the DRL.
2. Back-probe at pin "A" of the DRL Harness. Refer to Probing Electrical Connectors and Measuring Voltage Drop in Wiring Systems

Is voltage present?

12 volts

Go to Step 9

Go to Step 8

Verify continuity in circuit 33 (TAN/WHT), pin to pin.Refer to Testing for Continuity in Wiring Systems

Is continuity present?

ohms

Go to Step 11

Go to Step 10

Repair open in circuit 1134 (PPL/WHT). Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Park Brake System Check

--

Replace the DRL Module. Refer to Daytime Running Lights (DRL) Control Module Replacement in Lighting Systems.

Is the repair complete?

--

Go to Park Brake System Check

--

Locate and repair the open in CKT 33 (TAN/WHT) between the DRL Module and the I/C. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Park Brake System Check

--

Replace the Instrument Panel Cluster. Refer to Instrument Cluster Replacement in Body and Accessories.

Is the repair complete?

--

Go to Park Brake System Check

--