Horn Pad Replacement - On Vehicle C3500HD

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the negative battery cable.



2. Pull the four corners of the horn pad from the steering wheel.
3. Disconnect the ground wire.
4. Disconnect the horn wire assembly.

1. Connect the horn wire assembly.
2. Connect the ground wire.
3. Push the horn pad assembly onto the steering wheel.
4. Connect the negative battery cable.