Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle Column Shift

1. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .



2. Pop the wire harness assembly (4) out of the wire harness strap (5).

Remove the wire harness straps (3) from the wire harness assembly (4).

Remove the wire harness strap (2) from the upper tilt head assembly (1).




3. Slide the 2 connectors (2) of the turn signal and multifunction switch assembly out of the bulk head connector (1).



4. Remove the 2 pan head tapping screws.



5. Remove the turn signal and multifunction switch assembly.

Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle Floor Shift

1. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .



2. Pop the wire harness assembly (4) out of the wire harness strap (5).
3. Remove the wire harness straps (3) from the wire harness assembly (4).
4. Remove the wire harness strap (2) from the upper tilt head assembly (1).



5. Remove the 2 pan head tapping screws.



6. Slide the 2 connectors (2) of the turn signal and multifunction switch assembly into the bulk head connector (1).



7. Remove the turn signal and multifunction switch assembly.